- Brand: Befano
- Material: Stainless Steel
- Color: 1/2″ & 3/8″ Blades French Fry Cutter
- Special Feature: Interchangeable Blades
- Recommended Uses For Product: Vegetable
- Blade Material: Stainless Steel
- Blade Shape: Square
- Operation Mode: Manual
- EFFORTLESSLY PREP FRIES: The stainless-steel blades, as well as the sturdy legs and suction cup bases, give you the best cutting leverage for cutting potatoes. Meet ergonomic design. Any smooth, flat surface will work with the commercial French Fry Cutter. The 2.4″ suction cups prevent it from slipping away, reducing the outflow of force. The locking system ensures that the blades do not move while cutting.
- 2 BLADES, 2 FRY SIZES: Comes with 2 changeable blades that perfectly cut 1/2″ thick or 3/8″ thin. Get restaurant-quality fries right in your own home! You can also use this tool to cut carrots, onions, and zucchini. Additionally, you can prepare sweet potatoes. If placing potato slices in the cutter box, you’ll get potato cubes.
- PERFECT FOR DEEP & AIR FRIERS: The Befano French Fry Cutter machine provides a larger cutter box, measuring 5.5*3.7 inches, so you do not need to quarter or half cut the potatoes. Get 3″ length per fry, perfect for deep fryers and air fryers. Easily prepare fries for a snack, party, or dinner.
- COMPACT & EASY TO CLEAN: The potato cutter is smaller and easier to clean than other potato french fry cutters on the market, which take up too much space. It is compact enough to store in a kitchen cupboard. Its handle is detachable, so it can be put aside in storage. To clean the blades after use, simply run them underwater. Using high-quality materials, you don’t need to worry about rusting due to rinsing.
- SIMPLE INSTALLATION & BLADE CHANGING: The potato cutter is easy to install, and the blades can be changed to the size you need. Moreover, it comes with useful tools. Keep fingers always clear of the cutting blade. Never hold the product with your hands in the line of the cutting blade.

























Diane Kistner –
This is a heavy duty vegetable cutter with very sharp blades. I was quite pleased that weak little old me was able to quickly push through 10 lbs. of whole peeled potatoes without difficulty. The only thing I don’t like is that the pusher plate does not push into the blades enough to push the ends of the vegetables through. The first time I used it, I was using a spatula to try to force the end pieces on through the blades, but that seemed dangerous. I discovered that if you leave the level in the pulled-down position, it’s easier to grab and pull and sliced potato or other veggie out the other side, and it does work to get most of it out this way. Still, I wound up with some pieces stuck in the blades.I was following a YouTube video showing how they diced up potatoes for dehydrating, and they set the cutter beside the sink and cut the potatoes straight into a sink filled with cold water. I was able to do this, too. I thought it would be easier to cross-slice the potatoes by hand, then run them through the slicer to dice them, but it turned out it was easier to cut them fry-style first, then cut batches of them into dices by hand on the cutting board. It went faster that, way, anyway.One point of improvement would be if you could rotate the rubber feet after screwing them in slightly to be sure the little pull tabs are facing outward so you can reach them. No matter how many times I tried to screw the suction feet in all different kinds of ways, I could never get all of them to wind up with the tabs on the outside. Without access to the tabs, it’s very hard to remove the stuck-on cutter from the countertop. I’ve got it sitting by the sink right now on a hard silicone cutting board, which it won’t stick to because of the cuts, and next time I use it I’m going to stick it to the bottom of my tub-style sink. I’ve already tried doing it, and it will work that way. Then I can spray it down when finished right there in the sink.
kathryn clayton –
Easy clean up, very sharp, super quick process. Lever is a little loose and plastic bit on lever that helps lever slide back and forth on apparatus doesn’t stay put but also doesn’t affect the operation of lever.
Amazon Customer –
This cutter was easy to use, the blades were sharp, and its sides and corners were rounded so there was no metal that would cut you. (We experienced this with other fry cutters) The suction cups did not work on our counter top which are formica. This did not take away from the performance of the cutter. The frys were perfect!!
Charles –
Quick and easy set up and clean up.Be careful.I barely brushed the blades with a knuckle and was cut. They are razor sharp and work great.
K. D. Flick –
I wish I had found this cutter long ago. All cutter companies claim their blades are sharp…..but “sharp” is a relative term. There’s sharp compared to an ice cream stick……and then there’s SURGICALLY sharp. The blades on this cutter are surgically sharp. It’s built nicely, and the leverage points are engineered perfectly. Took about 2 minutes to assemble. The suction cups held it down firmly. The polished stainless steel components make it a breeze to clean. For the price point, this cutter is the best ever !
Russell –
Heavy duty and best thing is you can make long ? fries instead of stubbies.
Jennifer –
Bought for my hubby and he just absolutely loves it!!!
G –
Very hard vegetables, like fresh sweet potatoes, are difficult to push through easily. Other vegetables work well.